PRIS:24 000 kr med media kort

Chord Sarum högtalarkablar 2X2 meter

Dessa kablar kan du köpa i andra längder ,då kostar dom 6000:- extra per halvmeter.Maila oss för mer information.


Conductors: 2 x 10 AWG multi-strand silver-plated oxygen free copper.

Configuration: Individually shielded twisted pair configuration.

Conductor insulation: Air spaced PTFE (Polytetrafluoroethylene).

Shielding: Dual layer, high frequency effective braid and heavy gauge foil.

Jacket: PTFE and white braid.

Diameter: 2 x 12mm.

Colour: White.

Terminations: Chord 24 karat gold-plated banana plugs, direct gold-plated copper spade connectors and BFA Camcon connectors.

Because of the complexity of construction, Sarum speaker cable is only available in factory-terminated lengths.
Each set of Sarum speaker cable is produced to order and although the conductor pairs are separately shielded, the cable is twisted along its length in order to improve flexibility. Each end of the cable is secured with an aluminium clamp, designed to hold the cable securely but not to compress the conductors. Experiments showed that compressing the shield and insulation on either speaker or interconnect cables altered the characteristics of the cable and subtly degraded performance.

Use it with

Sarum speaker cable will do what really really good speaker cables do. It will let you hear what your system is doing. It will add nothing (in terms of unwanted colouration and noise caused by interference) and take nothing away (detail, dynamics of all sorts, timbre, tone). It’s as coherent as your system. It’s pretty close to invisible.

There is something very special about a system fitted with Sarum Tuned ARAY interconnects and Sarum speaker cable, but even as the only Sarum cable in a system, Sarum speaker cable produces profoundly musical improvements.


(Min length: 1.5m pair)
“On its own it seems to bring so much control and definition, but used with Tuned ARAY interconnects you just forget about the speakers, the cables and the electronics and get caught up in the music.”
The aim of any speaker cable designer is to produce a cable that allows as much information through as possible, and at the same time ensuring that the cable has a neutral tonal signature. In other words it’s a speaker cable, not a tone control.
This is just what Sarum speaker cable achieves. It’s a speaker cable that will carry information (down to micro dynamic and micro tonal) extremely accurately. It will do so over any length as well.
Sarum speaker cable uses very high quality silver-plated copper conductors and lots of them. It’s a properly heavy speaker cable with an extremely low resistance measurement.
The really impressive thing about Sarum speaker cable though is its ability to disappear into any system it’s used in. Its signature is fundamentally neutral, so what you will hear is your speakers and electronics, not the speaker cable.
Fit Sarum speaker cable to any speaker, either stand mounted or floor standing, and start properly discovering the performance of your system and the power of your favourite music. Use it with Tuned ARAY interconnects and you’re going to get a truly musical sound that borders on magical.